Connecting the USF.Go to Wi-Fi
Needed to upload a recording. This is how you choose a Wi-Fi network in the app.
6 steps
To upload a recording, the camera must be connected to Wi-Fi or a network cable (LAN). You set this up via the USF.Go app.
- Switch on the camera and open the USF.Go app (see Opening the USF.Go app)
- Click the Wi-Fi status at the top (“Manage Wi-Fi connection”)
- Click “Scan”. The camera searches for Wi-Fi networks nearby
- Click “Connect” next to your network
- Enter the Wi-Fi password. The password is sent to the camera once and is not stored
- Wait until “Wi-Fi: [name of your network]” appears at the top, with an IP address
Prefer a network cable? Connect the camera to your network. At the top you then see “LAN: connected”.
Was this helpful?